Firmware Specifications
OS
+ Linux
Supported Cameras
+ Supports all D-Link network cameras. Includes support for auto-discovery, and up to 1.3 megapixel resolution.
Recording Performance
+ Up to 120fps at D1/240fps at CIF for 8 channels
Camera Search
+ UPnP
Audio & Video Recording
+ Synchronized audio & video recording
Compression Format
+ H.264, MPEG-4, M-JPEG (for supported cameras)
Video Setting
+ Resolution, quality, frame rate, enable audio, go to camera interface
Recording Type
+ record by schedule, manual record and event-based recording (Motion detection from camera)
Remote Live View
+ Supported via IE remote live viewer
+ Maximum 8 simultaneous channels
Remote Live View Control
+ Live view, preset/go, patrol, focus, PTZ functions, remote IO (DNS-726-4 only), snapshot, full screen, digital zoom
Remote Playback Control
+ Playback with normal, fast forward/rewind and step forward/rewind
Remote Playback
+ Supported via IE and NVR client
+ Playback system with timeline GUI, search by event, area, cameras, date and time
+ IE & NVR client support 1 channel playback
+ Digital zoom to specified area
Overwrite Recording
+ Auto recycling when disk storage is full
File Export
+ Export videos to “AVI” or “ASF” file
+ Export images to “BMP” or “JPG” file
User Account
+ Additional accounts can be created to allow user access to the system, and specify authorization for camera channels, PTZ, etc.
DDNS
+ D-Link DDNS server support
System Time
+ Set the system time (D-Link NTP, input time, sync with computer, Daylight Saving Time)
Remote Backup
+ Remote software can backup raw data to redundant storage
+ Auto backup the Video of previous day to FTP server
System Status
+ Camera status, System status
+ Still picture EMAP suppport
Network Service Protocols
+ IPV4, ARP, TCP, UDP, ICMP
+ DHCP Client
+ NTP Client (D-Link)
+ DNS Client
+ DDNS Client (D-Link)
+ SMTP Client
+ HTTP Server
+ PPPoE
+ UPnP
+ IP filtering
User Interface
+ Internet Explorer v6 or later
+ NVR Search utility
Hardware Specifications
Standards
+ IEEE 802.3/u/z
+ Auto MDI/MDI-X
+ SATA I, II
HDD
+ HDD control & manage via PC
+ Reformat Disk
+ RAID 0, 1
+ JBOD
Two Reset modes
+ Reset firmware GUI button
+ HW reset button (hold for 5 seconds)
Flash ROM
+ 32MB
RAM
+ 128MB DDR
Network Interface
+ Gigabit Ethernet LAN port (10/100/1000 Mbps)
I/O ports
+ RJ45 port x1
+ DC-in jack x1
+ USB port for UPS status update (optional)
Power Adapter
+ DC12V/3A, DC5V/3A
Reset Button
+ Reset to factory default
Security
+ Front panel lock
+ Device lock hole
Power Consumption
+ Max. power consumption: 23.59W
+ Standby state max. power consumption: 7.26W
Dimension (W x D x H)
+ 198 (W) x 104 (D) x 132 (H) mm (7.8 x 4.1 x 5.2 inches)
Weight
+ 1.23 kg (2.7 lbs)
Operating Temperature
0˚ to 55˚ C (32˚ to 131˚ F)
Storage Temperature
-20˚ to 70˚ C (-4˚ to 158˚ F)
Humidity
+ Operating: 5% to 90% (non-condensing)
